Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Pocket Transmitter for
Audio Transmission
These instructions are intended for users without
any specific technical knowledge Please read the
instructions carefully prior to operation and keep
them for later reference
All operating elements and connections can
be found on the fold-out page 3
1
Overview
1 Transmitting antenna
2 Power switch
3 Indication of the transmission group and the
transmission channel (also see table fig 3 on
page 9)
4 Microphone connection (4-pole mini XLR jack)
5 Button to scan the transmission group /
chan nel in ascending order (in the group ad-
justing mode / channel adjusting mode) and
to activate the locking function (in the lock
adjusting mode)
6 Button to scan the transmission group /
chan nel in descending order (in the group
adjusting mode / channel adjusting mode) and
to deacti vate the locking function (in the lock
adjusting mode)
7 Indication of the battery status
8 Button SET
with the unit not locked:
to call up and to exit the adjusting modes
for the transmission group / channel, locking
function
☞
chapters 5 1 and 5 2 1
with the unit locked:
to call up and to exit the adjusting mode for
the locking function
9 Gain control; to match the input sensitivity,
turn the control with the adjusting key supplied
10 Battery compartment for two 1 5 V batteries
of size AA (R6)
11 Cover of the battery compartment
2
Important Notes
The unit corresponds to all relevant directives of
the EU and is therefore marked with
•
The unit is suitable for indoor use only Protect
it against dripping water and splash water, high
air humidity and heat (admissible ambient tem-
perature range 0 – 40 °C)
☞
chapter 5 2 2
•
For cleaning only use a dry, soft cloth; never use
chemicals or water
•
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is
not correctly operated or if it is not repaired in
an expert way
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment
3
Applications
Together with the multifrequency receiver US-
903DC -PRO / 5 from JTS, this multifrequency pocket
transmitter makes up a wireless audio transmission
system The transmitter operates with four trans-
mission groups (A – D) to which 16 transmission
channels are assigned, i e altogether 64 factory-
set transmission channels are available These chan-
nels in the UHF range of 518 – 542 MHz can be
selected as desired
The transmitter is supplied with an artificial
leather bag for fastening the transmitter to your
clothes and with the Lavalier microphone CM-501
Instead of the CM-501, it is also possible to use
other microphones with a 4-pole mini XLR plug
from JTS
3.1 Conformity and approval
Herewith, MONACOR INTERNATIONAL declare that
the pocket transmitter PT-920BG / 5 complies with
the directive 2014 / 53 / EU The EU declaration of
conformity is available on the Internet:
www jts-europe com
Restrictions or requirements apply in the fol-
lowing countries:
CZ
DE
IT
LT
In the Federal Republic of Germany, the unit
PT-920BG / 5 requires a frequency assignment
(for which a fee is charged) In other countries, it
is necessary to apply for a corresponding approval
Prior to operating the unit outside Germany, please
contact the MONACOR subsidiary or the corre-
sponding authorities of the respective country
Links to the national authorities can be found via
the following Internet address:
EL
FI
FR
MT
PL
7
Tabla de contenido
