Monacor TVCCD-400 Manual De Instrucciones página 10

GB skilled personnel, no liability can be tak-
en over for possible damage.
3 Applications
The black/white camera TVCCD-400 has
especially been designed for monitoring
and alarm systems. Due to its small di-
mensions an easy mounting is possible at
any desired place. In connection with the
power supply unit MONACOR SCA-400 it
can be used as a one-cable camera. In
this case the supply voltage is fed in via
the video output (1).
10
4 Lenses
All lenses with a C mount and CS mount
can be screwed at the TVCCD-400.
1. Lenses with a C mount
(e. g. MONACOR VWL series)
Screw off the protection cap and
tightly screw the lens on the C mount
adaptor ring (6).
2. Lenses with a CS mount
Screw off the C mount adapter ring
(6). Tightly screw the lens on the CS
mount ring (5).
Attention! The lenses of the lens assem-
bly and the CCD image sensor chip must
be protected against dust or other impuri-
ties and must not be touched with the fin-
gers in any case.