Putting Into Service - AEG PWI 4914 FA Instrucciones De Servicio

PW_4914_Bed_Anl_A5_3.qxd
Купить в интернет-магазине http://clatronic-shop.com.ua
GB
Guideline for the body water, muscle and
bone shares as percentages of the body
mass and the calorie requirements to cover
the daily requirement:
Age
(years)
Water Muscles Bones
6-11 54-65% 24-34% 15-19% 1500-2000
12-15 54-64% 28-38% 14-18% 2000-2400
16-39 50-60% 32-38% 15-19%
40-60 45-55% 30-36% 15-19%
over 60 40-55% 29-35% 14-18%
Athlete
16-50 52-64% 34-41% 15-19%
Attention: Owing to great variations in the
level of body fat it is diffi cult to obtain a
reference value. On average for adult men
the best time for the measurement is between
6 and 8 o'clock p.m. because the level of
body fat is very constant during this period!
Setting the time and date
After installing
the batteries
into the display,
the time, date,
CLOCK and the
current ambient
temperature will
be appear in the display (Fig. 4). Set the time
as described below:
Push the SET button to set the time. The
year will first start to flash on the display.
Push either the P/
hold down the P/
run will start. Pushing the SET button will
switch the display to the next setting. Use the
62
28.08.2007 12:30 Uhr
Весы напольные AEG PWI 4914 FA
Women
Normal values
Calories
(kcal)
2000
1800
1600
2600
(fig. 4)
or ATH/ button. If you
or ATH/ button a quick
Seite 62
Example for the calculation of the bone
percentage:
A man weighs 70 kg and is 35 years old.
The determined bone mass is
12.6 kg (12.6 x 100 / 70 = 18%).
Men
Normal values
Water Muscles Bones
56-67% 25-36% 15-19% 1600-2200
58-69% 32-44% 15-19% 2200-2700
55-65% 38-44% 16-20%
50-60% 36-42% 16-20%
45-60% 34-40% 15-19%
58-70% 41-48% 16-20%
P/ and ATH/ buttons to set the correct
month, day, hours and minutes. Confirm your
last setting with the SET button and the tem-
perature in °C or °F will appear. Pushing the
UNIT button will change the display from °C
to °F and vice versa.
The data must be set again if the batteries
are removed from the display or if they must
be replaced.

Putting into service

Simple Weighing Function
Position the balance on a hard, flat surface
(avoid carpets). Uneven floors lead to imprecise
readings.
1. Switch the scale on by applying slight
pressure on the glass surface with your
foot or toes. A red indicator lamp lights up
thereby signalling that the device is still not
ready for use. A green indicator lamp indi-
cates that the scale is ready for use.
Switch the display on by pushing the
MODE button. "8888", WT-FAT, HELO
and WT (weight) will appear in the display.
Calories
(kcal)
2300
2100
1800
3000