SCHOTT TITRONIC 110 plus Manual De Instrucciones página 44

40
Action of the keyboards
In combination with the TITRONIC
specific functions assigned to which are listed in the table below (also cp. Fig. 10)
Mini PC- Standard MF2-
keyboard, type keyboard or
no. TZ 2835 from standard mini-
SCHOTT keyboard
<START> <F1>
<STOP> <F2>
<Rinse> <F3>
<FILL> <F4>
<Fill Speed> <F5>
<Param 1> <F6>
<Param 2> <F7>
<Param 3> <F8>
<Dos Speed> <F9>
<DOS> <F10>
<ESC> <ESC>
<↑> <↓> <↑> <↓>
<ROLL UP> <ROLL UP>
<ROLL DOWN> <ROLL DOWN>
0...9 0...9
Decimal point Decimal point
<ENTER>
<ENTER> or <↵
>
<DEL>
<DEL> or <←>
Letters, ASCII Letters, ASCII
characters characters
All other keys
Working with the TITRONIC
®
110 plus Piston Burette, the keys of the keyboards being used have
A c t i o n
Start of the dosing operation.
Stop of dosing / Filling/Initial filling.
Start of initial filling, number of repetitions, 2 times min.
Fill command, executed in the set time, in terms of ml/ min.
Call of the menu for setting the filling speed.
Call of the menu for setting the RS parameter set.
Call of the menu for setting the baud rate.
Call of the menu for setting the device address.
Call of the menu for entering the dosing speed.
Dosing mode; if the Start key is pressed in this mode, the set vol-
ume will be dosed.
<ESC> will take you to the previous level within the menu.
A max. of 2 steps is required.
Scrolling in overview mode.
Setting of the contrast of the alphanumeric display.
Parameter input.
Acknowledgement of the input parameters. The present operating
instructions always quote the <ENTER> key in reference to both
keys.
Deletion of the input figure/character above the cursor.
Without any function.
_____ are without any function.
®
110 plus Piston Burette