Driving The Wheelchair; Leg Supports - B+B Neo XXL Manual De Instrucciones

Neo XXL
| Electric Wheelchair

4.3. Driving the wheelchair

Commissioning
• Sit in the seat of your B+B wheelchair and place your legs of the
footrests.
• Make sure that you are sitting as far back in the seat as possible
• Make sure that there is no loose clothing such as scarves, shirts etc.
is hanging from the wheelchair and could be caught in the wheels
• Make sure that you are comfortably and securely
• Press the On/Off button to switch on the Neo XXL
• All electrical driving functions are now available
Driving functions
• Your dealer can adjust the values for speed, acceleration and
deceleration to your requirements subject to the legal regulations.
• For a start select a low mode and increase it while moving if
required.
• Use the joystick to start moving. The joystick is used simultaneously
to increase the speed and to change the direction of movement.
When the joystick is in central position the electro-magnetical brake
is active, unless the joystick is not moved the wheelchair stands still.
70
Before moving check that the electromagnetic brake
is correctly locked. The safest way is to make sure
the electrical wheelchair is switched OFF!
seated.
Electric Wheelchair |
Moving forward: to move forward in a straight line move the joystick
cautiously forward. The further forward the joystick is moved, the faster
your wheelchair gets. If you release the joystick the wheelchair will
automatically be braked to a stop.
Reversing: to move in reverse mode, move the joystick cautiously back.
The further back the joystick is moved, the faster your wheelchair gets.
If you release the joystick the wheelchair will automatically be braked
to a stop.
Turning corners: to change direction of travel, tilt the joystick to the
left or right. This can also be done when the joystick is tilted forwards
or backwards, i.e. while driving backwards or forwards.

4.4. Leg supports

To make it as easy as possible to enter and leave your wheelchair, the
foot plates can be folded up, or the leg rests can be swung to the side
out of the way or removed.
• Open the lock to swing the leg rest to the side (fig 44).
• The leg rest in the swung-out position can be completely removed
(fig.45).
• When you want to replace the leg rest, proceed in reverse order.
• Move the leg rest to the forward position until you hear it lock into
place.
Bischoff & Bischoff GmbH | 01.06.2019
Neo XXL
44
45
71