Side Parts; Skirt Guard - B+B BX 11 Manual De Instrucciones

Ocultar thumbs Ver también para BX 11:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

BX 11
| Active wheelchair
4.2.2. Leg rests with separated
foot plates
The BX 11 (art. no.: 1612013501) is equipped with removable leg rest.
The footplates can be folded upwards and to the side, positioned at
an angle and adjusted to length of the user's lower leg. The leg rest
can be removed, folded pivoted and reattached without tools.
13
Attaching legrests
Hold the legrests on the upper part such that this part points
outwards.
Now push the leg rest with the guide profile into the hole in the
frame (Fig. 14).
Tilt the leg rests forward until they lock in place with a clearly
audible sound, and fold the foot plate down.
14
Swinging away and removing the leg rests
To make it as easy as possible to get into and out of your folding
wheelchair, you can simply swing the leg rests away, either
Fold the foot plates up.
Pull the stop up and fold the leg rest out (Fig. 15).
In the outer position, the leg rest can be pulled upwards (Fig. 16).
To return to the original position, simply engage the leg rests and pivot
15
them forward until they lock into place.
16
56
Setting the legrest length
The leg rest have 5 settings at 2 cm increments to adjust the length of
the lower leg.
Remove the two Allen socket screws (4 mm) from the leg rest tube
(inside and outside), and adjust it to the desired length (Fig. 17).
Retighten the screws after the adjustment.
Angle-adjustable foot plates
The angle of the foot plates can be adjusted (Fig. 18).
Unscrew the Allen bolt.
Adjust the foot plate to the required position by rotating the
toothed ring.
Retighten the allen bolt.
When standing up from/sitting down in the
wheelchair, you must not stand on the footrest
under any circumstances! Be sure to adjust
equally on both sides.

4.3. Side parts

4.3.1. Skirt guard

The BX 11 is equipped with aluminium skirt guards (Fig. 19) as
standard. These are secured to the frame on the front and back. The
height of the skirt guard must be readjusted if the seat position or tyre
size is changed.
The adjustment of the skirt guard can be found in the installation
manual.
Bischoff & Bischoff GmbH | 01.06.2019
BX 11
Active wheelchair |
17
18
19
57
Tabla de contenido
loading

Tabla de contenido