Block Diagram; All Models - Fender RUMBLE 500 Combo Manual De Instrucciones

MODEL

ALL MODELS

INPUT IMPEDANCES 1MΩ (Input)
INPUT SENSITIVITY
(For full power at 100Hz, with Gain/Master at "10" and tone controls at "0")
TONE CONTROLS BASS: ±15dB @ 80Hz
HIGH-MID: ±12dB @ 1.2kHz
SHAPE FILTER
BRIGHT: +13dB @ 10kHz
VINTAGE: Dynamic compression (-9dB max) with low pass (-6dB/oct) @ 400Hz
EFFECTS LOOP IMPEDANCES SEND: 1kΩ (balanced)
LINE OUT
OUTPUT IMPEDANCE: 3.3kΩ (balanced)
HEADPHONE OUTPUT 280mW into 32Ω/Channel
RUMBLE 40
MODEL
POWER REQUIREMENT 110W max/45W typical
POWER AMP OUTPUT 40W into 8Ω
SPEAKERS One 10 in (25.4 cm) 8Ω Special Design Ceramic
RUMBLE 200
MODEL
POWER REQUIREMENT
400W max/70W typical
POWER AMP OUTPUT 140W into 8Ω
200W into 4Ω
SPEAKERS One 15 in (38.1 cm) 8Ω Eminence® Ceramic
Compression tweeter
MODEL RUMBLE 500
POWER REQUIREMENT 950W max/150W typical
POWER AMP OUTPUT 350W into 8Ω
500W into 4Ω
SPEAKERS Two 10 in (25.4 cm) 16Ω Eminence® Ceramic
Compression tweeter
Specifications are subject to change without notice. Visit www.fender.com for additional product information.

BLOCK DIAGRAM

SPECIFICATIONS
3
10kΩ (Aux In)
25mVrms (Input)/250mVrms (Aux In, both channels driven)
LOW-MID: ±12dB @ 280Hz
TREBLE: ±15dB @ 10kHz
CONTOUR: +1dB @ 80Hz, -13dB @ 670Hz, +2dB @ 8kHz
RETURN: 22kΩ (balanced)
MAXIMUM OUTPUT: +3.75dBU
RUMBLE 100
310W max/50W typical
100W into 8Ω
One 12 in (30.5 cm) 8Ω Eminence® Ceramic
RUMBLE 200 HEAD
400W max/70W typical
140W into 8Ω
200W into 4Ω
NA
RUMBLE 500 HEAD
950W max/150W typical
350W into 8Ω
500W into 4Ω
NA