Sunny Health & Fitness SF-B1423 Manual Del Usuario página 11

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-
907-8669).
#90L/R
9/16*20*H8*S19
#71
D5*Φ13*1
#90L/R
9/16*20*H8*S19
#72
M5*16*Φ10
#71
D5*Φ13*1
#72
M5*16*Φ10
15
S15
2pcs
#88 1pc
2pcs
S19
#89 1pc
S15
2pcs
#88 1pc
2pcs
2pcs
S19
#89 1pc
2pcs
STEP 3:
WARNING! Read instructions carefully as improper
assembly may cause permanent damage to your bike.
Note: The Pedals (No. 92L/R) are marked "L" and "R"
for Left and Right.
Remove the 2 Nylon Nuts (No. 90L/R) located on the
Pedals (No. 92L/R).
Turn the Tension Control Knob (No. 15) CLOCKWISE
as tightly as you can with your hand.
Align the Left Pedal (No. 92L) with the Left Crank (No.
45L) at 90°. Turn the pedal bolt on the Left Pedal (No.
92L) COUNTER-CLOCKWISE as tightly as you can
with your hand. Then, use Spanner (No. 88) to tighten
and secure.
Turn the Left Nylon Nut (No. 90L) CLOCKWISE as
tightly as you can with your hand. Use Spanner (No.
88) to hold the pedal bolt on the Left Pedal (No. 92L)
and use Spanner (No. 89) to turn the Left Nylon Nut
(No. 90L) CLOCKWISE at the same time, until it is
tightened on to the Left Crank (No. 45L).
Align the Right Pedal (No. 92R) with the Right Crank
(No. 45R) at 90°. Turn the pedal bolt on the Right Pedal
(No. 92R) CLOCKWISE as tightly as you can with your
hand. Then, use Spanner (No. 88) to tighten and
secure.
Turn the Right Nylon Nut (No. 90R) COUNTER-
CLOCKWISE as tightly as you can with your hand. Use
Spanner (No. 88) to hold the pedal bolt on the Right
Pedal (No. 92R) and use Spanner (No. 89) to turn the
Right Nylon Nut (No. 90R) COUNTER-CLOCKWISE
at the same time, until it is tightened on to the Right
Crank (No. 45R).
Remove 2 Screws (No. 72) and 2 Washers (No. 71)
from the Main Frame (No. 85) using Spanner (No. 88).
Attach the Water Bottle Holder (No. 70) to the Main
Frame (No. 85) using the 2 Screws (No. 72) and 2
Washers (No. 71) that were removed. Tighten and
secure with Spanner (No. 88).
10
Tabla de contenido
loading

Tabla de contenido