Schulz AGE 250 Manual De Instrucciones página 46

and masks, non-slip protective gloves, heavy long trousers, non-skid safety shoes and ear protection. This
reduces the risks against personal injury;
• While in use, the equipment has electrical or hot components, cutting parts and moving parts;
• Firmly hold the mower with both hands. Always attach the product to the handle. Do not carry it only
with your hands. Keep the handle free from oil and fuel.
• Remove all adjustment tools before turning your equipment on. A tool or part stuck in moving of the
equipment may cause serious injuries.
• Dress properly. Do not wear loose clothing or or jewelry that may come into contact with the moving
part of the tool during use. If you have long hair, contain it before using the tool.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool
in unexpected situations. Know how to stop quickly in an emergency.
• Keep a balanced and stable stance while using the machine and do not mow by pulling the machine towards
you.
• Keep all parts of the body away from the cutting parts. Do not remove cut material or hold material to
be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment of
inattention while operating the equipment may result in serious personal injury.
4.
Power tool use and care:
• Choose the equipment model best suited for its intended use, don't exceed maximum capacity, if necessary,
acquire a more suitable model for your application. This will increase effi ciency and safety in your work.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Store idle power tools out of the reach of children and do not allow people with physical, sensorial, or mental
handicaps orr without experience or knowledge of use to operate the mower.
• People without the proper experience or knowledge may use this equipment only if supervised and instruc-
ted by someone who is responsible for his or her safety.
• This equipment must not be used by children under any circumstances.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely
to bind and are easier to control. Replace any blade that has been damaged. Always make sure blade is
installed correctly and securely fastened before each use. Failure to do so can cause serious injury.
• Use of the power tool for operations different from those intended could result in a hazardous situation.
5. Combustion tools use and care:
• To reduce the risk of injury associated with exhaust fume inhalation, do not operate in unventilated area. The
exhaust gases contain harmful carbon monoxide.
• While using the product, if abnormal noise or vibration occurs, stop the engine immediately and contact the-
nearest servicing dealer for assistance. Checking the fan is very important. If the rotating fan should break
up, it might lead to serious accidents.
• Never operate the machine in high wind, bad weather, potentially explosive atmosphere, when visibility is
poor or in very high or low temperatures. (Our recommended use environment is below 40 degrees C (104
degrees F).)
• The ignition system of your unit produces an electromagnetic fi eld of a very low intensity. This fi eld may
interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemaker should
consult their physician and the pacemaker manufacturer before operating this tool.
• Never put the machine down with the engine running.
• Never to touch the spark plug or plug cord while the engine is in operation. Doing so may result in
being subjected to an electrical shock.
• Never to touch the muffl er, spark plug, or other metallic parts of the engine or engine cover while
the engine is in operation or immediately after shutting down the engine. These metallic parts and engine
46