Phonic POWERPOD 740 PLUS Manual Del Usuario página 13

For "FR" models of the Powerpod, in addition to the Recording function on the previous page, there is also an onboard feedback killer. The
feedback silencer will effectively remove feedback frequencies from the main stereo output.
The Phonic feedback silencer found on the Powerpod FR & F offers 30 filters per channel. Each of these filters is either a "locked" or "dy-
namic" filter. Dynamic filters will actively seek and destroy frequencies. A fixed filter will lock onto these frequencies. The basic difference
is that a fixed filter will lock onto frequencies until reset, while dynamic filters will continuously find and remove feedback frequencies until
each filter is used, then start all over again.
Operation:
1. To begin, simply push the FB button. The lED indicator will
continuously flash to indicate dynamic filter mode is activated.
This will continuously seek and destroy feedback without re-
moving the music or vocal essences.
2. Push the FB button a second time to lock the feedback killer
at the frequencies detected in dynamic mode. In this mode,
the lED indicator will light up steadily. locked mode is par-
ticularly useful for professional sound engineers at rehearsal
sessions.
3.
Pushing the FB button again will bypass the feedback killer.
When bypassed, the lED indicator will not light up.
Operation:
1. activate Bluetooth by pushing the Bluetooth button.
2. Search for and pair with "Phonic.BT" in the Bluetooth setup
menu of your cell phone, tablet, Pc, or other Bluetooth-enabled
device.
3. If your device asks for a password, please enter "0000".
4. audio signals received through the Bluetooth interface will be
routed to channel 7 on the mixer.
5. If you cannot connect to the Phonic's Bluetooth input, it might
be because it is already connected to another device or some-
one has erroneously connected to it. Please restart your Phonic
product and attempt the Bluetooth connection again.
POWERPOD 740 PLUS / 740R / 740FR / 740W / 740RW / 780 PLUS
"F"
"W"
Feedback Silencer
NOTE: When feedback killer is active, the total program level may
decrease 2 or 3 dB - depending on the program content - which
can be compensated for using the main level control.
Push and hold the FB button for 2 seconds to reset the filters. This
will revert the unit back to dynamic mode.
The two operation modes (dynamic and locked) allow for flexible
operation ideal for most applications.
Wireless Bluetooth
6. When using smartphones and tablets, it may be an idea to turn
"airplane Mode" or "Flight Mode" on to stop phone calls or push
notifications from interrupting your audio.
NOTE: Not all modern Bluetooth-enabled devices allow for use of
external audio playback. In the case of laptops in particular, Blue-
tooth may be used for data transmission only - depending on the
model. This is a limitation of these devices and you will not be able
to use the Powerpod 'W' Bluetooth function with these devices.
9