Phonic POWERPOD 740 PLUS Manual Del Usuario página 11

31. Phantom Power Switch and Indicator
When this switch is in the on position it activates +48V of phantom
power for the XlR inputs on channels 1 to 4, allowing condenser
microphones to be used on these channels. The corresponding
lED will illuminate when the Master Phantom Power is activated.
32. Amp Select Switches
This switches control the activity of the built-in power amp,
enabling the user to alternate between the different signals which
can be processed by the built-in power amp and routed to the
speaker outputs on the rear of the device. This switch allows you
to select from: Main/Monitor – taking the monitor and main signals
and directing them to the appropriate speaker outputs – Main 1 /
Main 2 – using the Main 1/2 signal to feed the speaker outputs –
and Main Bridge – which combines the Main left and Right signal
and feeds them through the Bridge output. Please note that the
Bridge function is not available on the Powerpod 780 Plus.
NB. When using a mono bridge connection, do not connect a speaker to any
of the Main/Monitor a or B jacks, located on the rear of the mixer. Use the
"Bridge" speaker jack only.
33. Monitor Level Control
This rotary control allows the user to adjust the final signal level
sent to all Monitor outputs.
34. Main Level Control
This rotary control allows the user to adjust the final signal level
sent to the Main and Speaker outputs.
35. Level Meter
These level meters give accurate indications of when audio levels
of the Main 1/2 and Monitor outputs reach certain levels. The 0 dB
indicator illuminates is approximately equal to an output level of
+4 dBu. It is suggested for the maximum use of audio to set the
various levels controls so that it sits steadily between 0 and the
second highest level indicated on the level Meter to make full use
of audio, while still maintaining fantastic clarity. The Powerpod 740
and 780 models feature two single 5-segment lED displays.
36. Limiters
These LED indicators illuminate when the power amplifier's built-in
limiters are activated, which effectively reduce signal levels when
they reach high levels that could prove to damage sound quality.
37. Power Indicator
This lED indicator illuminates when power of your Powerpod
mixer is activated.
38. Bluetooth Button (Powerpod "W" models only)
This button essentially mutes the audio received by the Bluetooth
receiver. When Bluetooth signals are not muted, they will be
received by channel 7 on the Powerpod 740W or Powerpod
740RW mixer.
POWERPOD 740 PLUS / 740R / 740FR / 740W / 740RW / 780 PLUS
31
37
35
32
39. Wireless Ready LED (Powerpod "W" models only)
This lED will light up when a Bluetooth connection is established
to another Bluetooth device.
36
33
34
38
39
7