Optional Components
Hooking up optional components
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
D-LIGHT SYNC
controller (DLS-1)
A TV (AUDIO IN) L/R jacks
Use audio cords (not supplied) to connect the
audio output jacks of a TV to these jacks. Then,
you can output audio signal through this system.
B VIDEO OUT jack
(MHC-GNX660 only)
Use a video cord (supplied) to connect the video
input jack of a TV to this jack.
GB
26
* MHC-GNX660 only
To the video input
*
jack of the TV
From the audio output
jack of the TV
C D-LIGHT SYNC OUT jack
Connect the D-LIGHT SYNC controller to this
jack. You need to connect the D-LIGHT SYNC
controller to the lighting device* (not supplied).
The lighting device will react according to
control signals transmitted by the D-LIGHT
SYNC controller upon receiving music source
from the system. For details on the use of
D-LIGHT SYNC controller and lighting device,
refer to the respective operating instructions
supplied with the respective device.
* Refer to the D-LIGHT SYNC controller
operating instructions for the recommended
lighting device.
Note
The lighting effect may be different depending on the
connected lighting device or the type of music being
played back.
TV
D-LIGHT SYNC
controller cord