Programed Playback - Teac MC2630RSD-D2610MKII Manual Del Usuario

2
3
< Up to 32 tracks can be programed in the desired order.
Press the PROGRAM button in the stop mode.
1
"PROGRAM" lights on the display.
Press the numeric button to select a track or file.
2
track/file number
disc number
You can also use the SKIP buttons (.//) to select a track.
< If the unit has not yet detected the contents of the disc, you
can not enter 3-digit numbers with the numeric buttons. In
this case use the SKIP buttons (.//).
< You can not also enter numbers other than those detected as
specifying tracks/files in the disc.
14

Programed Playback

1 4
5
program number
Press the PROGRAM button to enter your selection.
3
Repeat steps to to program more tracks/files.
2 3
< If you made a mistake, press the CLEAR button. The last
programed number will be deleted.
< Up to 32 tracks/files can be programed.
When programing has been finished, press the PLAY
4
button to start programed playback.
When playback of all the programed tracks has finished, or if
one of the following buttons is pressed, the programed
playback stops:
But the programed contents aren't lost. You can return to the
programed playback by pressing the PLAY button.
< If the power is turned off, the programed contents will be
erased.
< When in the program mode, the following buttons don't
work:
SHUFFLE, INTRO
To check the programed order
In the stop mode, press the PROGRAM CHECK button
repeatedly. The track and program numbers will be shown on
the display.
STOP