Slave Mode - Cameo OPUS H5 Manual De Usuario

OPERATION VIA SACN PROTOCOL
Starting from the main display, press the rotary-push encoder to enter the main menu. Select the Control menu by turning and pressing the
encoder. By turning the encoder you can now select the menu item Protocol, confirm by pressing the encoder and then select sACN by
turning the encoder and confirm by pressing the encoder.
Information on the sub-menu items in the sACN menu and the relevant setting options is to be found in the table below.
Protocol sACN
Select by turning the encoder, confirm by pressing, change value or status by turning, confirm by pressing. Back with BACK.
DMX Address Setting the DMX start address
DMX Mode Selecting the DMX mode
Universe Group Setting the Universe Group
Universe Setting the universe
IP Address Setting the IP address: 1. Set block, confirm, set 2nd block, confirm ...
Subnet Mask Adjustment of the subnet mask: 1. Set block, confirm, set 2nd block, confirm ...
W transmitter Activate (On) or deactivate (Off) forwarding of the DMX signal via W-DMX
Establish (Linking) or release (Unlink) a connection to other W-DMX devices.
W-DMX standard Setting the W-DMX standard (G3 / G4s)
DMX XLR Out Forwarding the control signal via XLR Out Activate (On) and Deactivate (Off)

SLAVE MODE

Starting from the main display, press the rotary-push encoder to enter the main menu. Select the Control menu by turning and pressing the
encoder. By turning the encoder, select the menu item Protocol, confirm by pressing the encoder and then select Slave by turning the
encoder and confirm by pressing the encoder. Connect the slave and the master unit (same model, same software version) with a DMX
cable (Master DMX OUT – Slave DMX IN) and enable the standalone mode Static on the master unit. The slave unit will now follow the
master unit.
STANDALONE OPERATION STATIC
Starting from the main display, press the rotary-push encoder to enter the main menu. Select the Control menu by turning and pressing the
001–512
29ch/36ch
000–255
001-256
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
On
Off
Linking
Unlink
G3
G4s
On
Off
13