HEIDENHAIN AK LIC 411 Instrucciones De Montaje página 10

Permissible bending radii of connecting cable.
R : for rigid configuration, R : for frequent flexing
1 2
Zulässige Biegeradien der Anschlusskabel.
R : Dauerbiegung, R : Wechselbiegung
1 2
Rayons de courbure admissibles sur le câble de raccordement.
R : Courbure permanente, R
1 2
Raggio di curvatura consentito per il cavo di collegamento:
R : con curvatura fissa, R : con flessioni ripetute
1 2
Radios de torsión admisibles en los cables.
R : Torsión contínua, R : Torsión variable
1 2
1 = Cable support
Kabelabstützung
Support de câbles
Supporto del cavo
Apuntalamiento del cable
Follow the Mounting Instructions carefully!
– The mounting surfaces and threads must be clean and free of burrs and paint.
– Screw connections must comply with friction class B according to VDI 2230.
– The screws must be tightened to the specified tightening torque according to the Mounting Instructions.
– Pay attention to cable support and cable damage.
– In the application the encoder must be protected from the intrusion of particles and liquids (IP00).
– The scanning head may only be operated within the permissible mounting tolerances and within the measuring length of the measuring standard.
– Once mounting is finished, ensure that the scanning head does not collide with the screw from the parts kit.
– Materially bonding threadlocker is not permitted (friction class B)
10
: Courbure fréquente
Ø
R 1
¬ 3.7 mm R ‡ 8 mm
1
¬ 8 mm R ‡ 40 mm
1
 8
R 2
R ‡ 40 mm
2
R ‡ 100 mm
2
 50
