Setting the cooktop
In this chapter you will learn how to adjust the cooking
zones. In the setting chart you will find heat levels and
cooking times for various dishes.
Setting heat level
1
Push in control knob and turn to the desired heat
level (1-12 and booster function). The
corresponding cooktop display on the cooking
zone blinks.
2
Place appropriate cookware on top within 90
seconds.
If no pot is detected, the cooking zone is
automatically turned off again. To reactivate the
cooking zone, turn the control knob to 0 and reset
the heat level.
3
When the cooking zone is heating up, the
cooktop display and the light ring behind the
control knob are lit up continuously.
12
Turning off appliance
To turn off the cooktop, turn all control knobs to the 0
position
The residual heat display in the control knob ring of a
cooking zone that's too hot blinks slowly until the
cooking zone has cooled down.