Unitekno C102 Manual De Uso página 13

HOW TO FILL WITH WATER
Make sure that the appliance is
disconnected from the mains socket.
Lift the valve cap (V) to let out any
residual steam and unscrew in an
anticlockwise direction.
If the heater was under pressure,
wait for about two minutes.
Use olny water, max 2,5 l.
Screw up the top and lower the valve
cap (V).
Use ordinary tap water or deminera-
lized water.
Do not use detergents or other
substances.
HOW TO WORK THE HEATER
Insert the plug into the mains socket.
Press the pedal button
on the appliance.
The warning light switches on.
This shows that the appliance is
working.
Wait a few minutes until the warning
light switches off. Steam is now
available for cleaning or ironing.
NB: while the appliance is in use, the
warning light will switch on and
off several times; this warning light
may be ignored while the appliance
is being used.
The warning light indicates that
the heater is empty.
Press the button to use the iron
(only 902-903).
to switch
M = Pressure gauge
This indicates the pressure inside the
steam generator
S = Steam control
Each time the appliance is used, a
few drops of water may come out
when the start button is pressed for
the first time.
This is quite normal and is due to
condensate which forms when the
tube is still cold.
The same thing may happen after an
interval of any great length.
11