Connections; Connecting To Computer - Panasonic PT-LB20NTU Instrucciones De Operación

Connections

Notes on connections
B Read the instruction manual for each peripheral device carefully before connecting it.
B Turn off the power supply for all peripheral devices before making any connections.
B If the cables necessary for connection are not included with the peripheral device or
available as an option, you may need to prepare a proper cable for the device concerned.
B If there is a lot of jitter in the video signal, the projected image may flicker. In such cases,
it will be necessary to connect a TBC (time base corrector).
B Refer to the list on page 62 for details on compatible signals which can be input to the
projector.
B Only one audio system circuit is available for the AUDIO IN L-R connectors, so if you
change the audio input source, you will need to remove and insert the appropriate plugs.

Connecting to computer

Computer for
control use
Serial adapter
(ET-ADSER : sold
separately)
DIN 8-pin
(male)
RGB signal cable
(accessory)
Computer
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
NOTE:
B Do not input the signal to the RGB2 IN/1 OUT connector when "RGB2
SELECT" in the "OPTION" menu is set to "OUTPUT". (page 46)
Computer
RGB signal cable
Refer to the accessory CD-ROM
for details on the wireless
network that can be used for
controlling the projector with a
personal computer.
(PT-LB20NTU only)
Monitor
E -21
NGLISH