Festool CMS-GE Manual De Instrucciones página 11

Place the router on the router module [9]:
9-1
9-2
WARNING
Risk of accident
Make sure that the centring ring is seated
correctly in the opening on the router module
and the router.
Align the router so that the journal [9-2] on the
column guide is facing towards the cutting depth
adjuster and the adjustment plate [9-5] engages
in the hole [10-1].
Clamp the router by securing the three clamping
supports [9-4] in the three holes [10-2].
Unscrew the rotary knob [9-3] and move the
router upwards.
Use the crank handle [9-1] to set the height
adjuster so that the guide plate supports the
journal [9-2].
10-1
10-2
OF 1400
Attach the guide plate
[11-2] securely to the
slide on the height ad-
juster [11-1].
Insert the light grey cen-
tring ring 473809 for the
OF 1400 with the part
number faceup into the
recess on the router
module.
Lock the router in the low-
est position:
To do this, unscrew the rotary knob [12-1] for
adjusting the router cutting depth and push the
router downwards.
Tighten the rotary knob.
9-3
9-4
12-1
9-5
12-3
Attach the adjustment plate [12-2] to the thread-
ed hole [12-3] with the wide journal (width: 6 mm
(0.24 in.)) facing downwards.
13-1
13-2
Fit the extractor hood to the router base by fi rst
inserting the two tenons [13-1] on the extractor
hood into the recesses [13-2] on the router base,
then place the extractor hood on the router base
11-1
11-2
12-2
6 mm
(0.24 in.)
13-6
13-5
13-4
13-3
11