Teac TASCAM CD-A700 Manual Del Usuario página 13

Record Muting Operation
∑ Automatic spacing operation for
4-second blanks
recording)
Press the REC MUTE button during
recording. The tape movement
continues and a blank space of about 4
seconds is recorded (the RECORD
indicator blinks). The deck then enters
the Record-Pause mode automatically
(both the RECORD and PAUSE (ƒ)
indicators light).
To restart recording, press the PAUSE
button (the PAUSE indicator goes off).
∑ Automatic
spacing operation
4-second blanks (during record-pause)
In the Record-Pause mode, pressing the
REC MUTE button will initiate the above
record-muting operation automatically.
The deck then returns to the Record-
Pause mode.
∑ For a blank of more than 4 seconds
During recording, hold the REC MUTE
button depressed for longer than 4
seconds. A blank space will be left as
long as the button is pressed. Release
the button to enter the Record-Pause
mode. To restart recording, press the
PAUSE (ƒ) button.
O During record muting operation (while
the RECORD indicator is blinking),
pressing the REC MUTE button again
will release the record muting operation
and recording will restart without
stopping the tape.
Copying from CD to Tape
Using the CD SYNC function, a CD-to-tape
copy can be done easily and simply.
1. Load a compact disc.
(during 2. Load a recordable cassette.
3. Select ON/OFF of the DOLBY NR system.
O In the CD SYNC mode, the INPUT level
control has no effect, as the recording
level is
internally.
∑ To record from the beginning of
the tape
Press the CD SYNC button in the Stop
mode.
for
The tape is rewound to the beginning of
Side A and the counter is reset to "0000",
while the CD player is in the Ready mode at
the beginning of the first CD track.
After mute-recording for approx. 10
seconds (to avoid the leader tape), the
cassette deck drops into the Recording
mode while the CD player starts playback.
∑ To record from any desired
position of the tape
1. Move the tape to the desired position
and press the STOP (∑) button.
2. Press the RECORD button.
The deck enters the Record-Pause
mode.
3. Press the CD SYNC button.
CD-to-tape copying starts from the
current tape position.
O While CD SYNC is engaged, only the
STOP (CD), STOP (TAPE), OPEN/CLOSE
and TIME buttons are operational.
∑ Designating CD tracks to be
recorded on Side A or Side B
(A-B Program Dubbing)
By using the A-B Program Dubbing
function, you can designate CD tracks to
be recorded on Side A or Side B.
1. Press the PROGRAM button.
automatically adjusted
or
_ 13 _
2. Press the A-B button.
"A-" blinks and "B" lights in the display,
indicating that the CD player is now in
the "Side A program" mode.
3. Program tracks to be recorded on Side
A of the tape.
Perform the procedures described in
step 3 in the "Program Playback" section
on page 8.
O To display the total program time, press
the TIME button in the Program mode. It
will help you to fit the total recording
time to the tape length. Pressing the
TIME button again will return the CD
player to the Program mode.
4. Press the A-B button.
"A-" lights and "B" blinks in the display,
indicating that the CD player is now in
the "Side B program" mode.
5. Program tracks to be recorded on Side
B of the tape.
O Pressing the A-B button in the Side B
Program mode will return the CD player
to the Side A Program mode.
6. Press the CD SYNC button.
The tape is rewound to the beginning of
side A and the counter is reset to "0000",
while the CD player is in the Ready
mode at the first track of the Side A
program.
After mute-recording for approx. 10
seconds (to avoid the leader tape), the
cassette deck drops into the Recording
mode while the CD player starts the
program playback.
O If you press the RECORD button before
pressing the CD SYNC button, the
recording will start from the current
tape position (without rewinding the
tape to the beginning).
O If the tape on Side A ends before 01:30
(1 minute 30 seconds) of the current CD
track has been played, the recording of
Side B will start with that track. (except
with A-B Program Dubbing)
O When the CD player finishes playback,
the CD SYNC mode is released.
O If the tape comes to the end of Side B
before the CD player finishes playback,
the CD SYNC mode is canceled.