Working With The Laser Target Plate; Maintenance And Service - Bosch VisiMax GLL3-300 Instrucciones De Funcionamiento Y Seguridad

Working with the laser
target plate
The laser target plate 18 increases the
visibility of the laser beam under unfavorable
conditions and at large distances.
The reflective part of the laser target plate
18 improves the visibility of the laser line.
Thanks to the transparent part, the laser line
is also visible from the back side of the laser
target plate.
Working with the Tripod
(Optional Accessory)
A tripod offers a stable, height-adjustable
measuring support. Position the tool with
the 1/4-20 tripod mount 8 onto the thread
of the tripod 22 or a commercially available
camera tripod. For fastening to a commercially
available construction tripod, use the 5/8-11
tripod mount 9. Tighten the tool with the tripod
mounting stud.
Fastening with the BM 1
Positioning Device (Accessory)
(see figure D)
With the BM 1 positioning device 15, you can
fasten the tool, e.g., to vertical surfaces, pipes
or magnetic materials. The BM 1 positioning
device is also suitable for use as a ground
tripod and makes the height adjustment of the
tool easier. The clip attachment is suitable for
drop ceiling applications.
Store and transport the tool only in the
supplied protective case.
Keep the tool clean at all times.
Do not immerse the tool into water or other
fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning agents or solvents.
Regularly clean the surfaces at the exit
opening of the laser in particular, and pay
attention to any fluff of fibers.
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair
should be carried out by an authorized after-
sales service center for Bosch power tools.
2610048966 GLL3-300 01-18.indd 14
Use with Attachments

Maintenance and Service

-14-
Working with the Laser Receiver
(Accessory) (see figure D)
Use the laser receiver 16 to improve detection
of the laser lines in adverse lighting conditions
(bright environment, direct sunlight) and over
greater distances. Switch on receiver mode
when working with the laser receiver (see
"Receiver mode", page 11).
Laser Viewing Glasses
(Optional Accessory)
The laser viewing glasses filter out the
ambient light. This makes the red light of the
laser appear brighter for the eyes.
• Do not use the laser viewing glasses as
safety goggles. The laser viewing glasses
are used for improved visualization of the
laser beam, but they do not protect against
laser radiation.
• Do not use the laser viewing glasses as
sun glasses or in traffic. The laser
viewing glasses do not afford complete UV
protection and reduce color perception.
Work Examples
(see figures A–F)
Applicational examples for the tool can be
found on the graphics pages.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the tool.
In case of repairs, send in the tool packed in
its protective pouch 21.
ENVIRONMENT PROTECTION
Recycle raw materials & batteries
instead of disposing of waste.
The unit, accessories, packaging
& used batteries should be
sorted for environmentally friendly recycling in
accordance with the latest regulations.
1/12/18 3:15 PM