Tabla de contenido
Idiomas disponibles
Idiomas disponibles
This manual contains many important safety messages.
Always read and obey all safety messages.
This is the safety alert symbol° It alerts you to safety messages that inform you
of hazards that can kilt or hurt you or others, or cause damage to the product,,
All safety messages wil! be preceded by the safety alert symbol and the hazard
signal word DANGER, WARNING, or CAUTION. These words mean:
You _
be killed or seriously injured if you don't follow instructions.
You can be killed or seriously injured if you don't follow instructions°
indicates an imminently hazardous situation which, if not avoided,
may result in minor or moderate injury, or product-damage-only.
All safety messages will identify the hazard, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are not followed,,
To reduce the risk of fire, electric shock, or injury
to persons when using your product, basic safety
precautions should be followed, including the
following:
- NEVER unplug your refrigerator by pulling on the
power cord, Always grip the plug firmly and pull it
straight out from the outlet.
• Repair or replace immediately all electric service
cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or
abrasion damage along its length or at either the
plug or connector end,
• When moving your refrigerator away from the watl,
be careful not to roll over or damage the power cord,
• DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
DO NOT allow children to climb, stand or hang on
the refrigerator doors or shelves in the refrigerator.
They could damage the refrigerator and seriously
injure themselves.
Unplug your refrigerator before making any repairs.
NOTE: We strongly recommend that any servicing
be performed by a qualified individual.
Before replacing a burned-out light bulb, unplug
the refrigerator or turn off power at the circuit
breaker or fuse box in order to avoid contact with
a live wire filament. (A burned-out light bulb may
break when being replaced,) NOTE: Moving the
control to the OFF position does not remove power
to the light circuiL
For personal safety, this appliance must be properly
grounded. Have the war! outtet and the circuit
checked by a qualified electrician to make sure the
outlet is properly grounded.
3
Tabla de contenido
