Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
22 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from
20 Hz to 20 kHz with no more than 5 % total harmonic distortion.
CEA2006 Standard
Power Output: 17 Watts RMS × 4 at
4 Ohms < 1% THD+N
SN Ratio: 82 dBA
(reference: 1 Watt into 4 Ohms)
System
Laser
Semiconductor laser
Signal format system
NTSC
Monitor section
Display type
Wide LCD color monitor
Size
7 in.
System
TFT active matrix
Number of pixel
336,960 pixels
DVD/CD Player section
Signal-to-noise ratio
100 dB
Frequency response
10 – 20,000 Hz
Wow and flutter
Below measurable limit
Harmonic distortion (DVD)
0.01%
Tuner section
FM
Tuning range
87.5 - 107.9 MHz
Intermediate frequency
10.7 MHz/550 kHz
Usable sensitivity
9 dBf
Frequency response
30 - 15,000 Hz
Selectivity
75 dB (400 kHz)
S/N ratio
64 dB (stereo)
69 dB (mono)
Harmonic distortion at 1 kHz
0.5% (stereo)
0.4% (mono)
Separation
35 dB at 1 kHz
AM
Tuning range
530 - 1,710 kHz
Intermediate frequency
10.8 MHz / 450 kHz
Usable sensitivity
30 µV
Amplifier section
Outputs
Speaker outputs
(sure seal connectors)
Speaker impedance
4 - 8 ohms
Maximum power output
50 W × 4 (into 4 ohms, at 1 kHz)
General
Power requirements
12 V DC, from car battery (negative
ground)
Inputs
Power supply (1)
AUX (3)
Outputs
Front PRE out (1)
Rear PRE out (1)
Subwoofer (mono) (2)
Power antenna relay control lead (1)
Power amplifier control lead (1)
Rear Monitor OUT (1)
Tone controls Bass ±10 dB at 100 Hz
Treble ±10 dB at 10 kHz
Dimensions
With monitor closed
Approx. 178 × 50 × 185 mm (7
2 × 7
3
/
Mass
Approx. 1.7 kg (3 lb 12 oz)
Supplied accessories
Remote commander RM-X706 (1)
(incl. 1 lithium battery)
Connection box for XM tuner (1)
Parts for installation and
connections (1 set)
Operating Instructions (1 set)
×
1
/
8
in.) (W × H × D)
8
57