Safety; Proper Use - Fronius MTG 320i US Style Manual De Instrucciones

Safety

Proper use

The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in manual ap-
plications.
Any use above and beyond this purpose is deemed improper. The manufacturer shall not
be held liable for any damage arising from such usage.
Proper use includes:
-
-
Safety
Incorrect operation or poorly executed work can cause serious injury or damage.
► All activities described in these Operating Instructions may only be carried out by
► All functions described in these Operating Instructions may only be used by trained and
► Do not carry out any of the work or use any of the functions described until you have
An electric shock can be fatal.
There is also a risk of injury from the emerging wire electrode. Before commencing any of
the work described in these Operating Instructions:
► Turn the power source mains switch to the "O" position
► Disconnect the power source from the mains
► Ensure that the power source remains disconnected from the mains until all work has
Welding torch components that have become very hot during use can cause severe
burns.
► Before commencing any of the work described in these Operating Instructions, allow
Risk of injury and damage from loose connections.
► All cables, lines and hosepacks must be properly connected, undamaged, correctly in-
Carefully reading and following all the instructions given in the operating instructions
Performing all stipulated inspection and maintenance work.
WARNING!
trained and qualified personnel.
qualified personnel.
fully read and understood the following documents:
these Operating Instructions,
the enclosed "Safety rules" document,
all the Operating Instructions for the system components, especially the safety rules.
WARNING!
been completed
CAUTION!
all welding torch components to cool to room temperature (+25 °C, +77 °F).
CAUTION!
sulated and adequately dimensioned at all times.
5