Mounting; Orientation; Rigging - Chauvet DJ SCORPION Dual Manual De Usuario

Mounting

Orientation

Rigging

Mounting Bracket
Page 14 of 64
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The Scorpion™ Dual must be mounted in a position that includes planning for safe laser
usage. In addition, make sure adequate ventilation is provided around the product.
· Before deciding on a location for the product, always make sure there is easy access
to the product for maintenance and programming.
· Make sure that the structure or surface onto which you are mounting the product can
support the product's weight (see the
· When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, such as an elevated platform or a truss.
· When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracketed has a 13-mm hole, which is appropriate
for this purpose.
· The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Technical Specifications).
Mounting Clamp
(such as CLP-15 or CLP-15N
from CHAUVET®)
Safety Cable
(such as CH-05 from
CHAUVET®)
Surface
Supports
Scorpion™ Dual User Manual Rev. 1
Bracket
Adjustment
Knob x2