John Bean B 1200P Manual De Operador página 110

8
8
110
5-58
5-59
5-60
5-61
5-62
Operation
Fig. 5-58 OPTIMISATION "2"
START is signalled on the screen.
Spinn the wheel.
—
A compensation run is performed.
The screen "3" as shown in Fig. 5-59 is displayed.
Fig. 5-59 OPTIMISATION "3"
— Mount the tyre correctly on the rim and infl ate
to specifi ed infl ation pressure (make sure the
mounting guide rim of the tyre is correctly seated).
— Confi rm by pressing key 8.
The OPTIMISATION "4" screen (Fig. 5-60) is displayed.
Fig. 5-60 OPTIMISATION "4"
(fi rst measuring run of tyre/rim assembly)
— Clamp the wheel on the balancer.
— Readjust the wheel such that the valve is exactly
perpendicular to and above the main shaft.
— Enter the valve position by pressing key 8.
The OPTIMISATION "5" screen (Fig. 5-61) is displayed.
Fig. 5-61 OPTIMISATION "5"
START is signalled on the screen.
— Perform the measuring run.
A measuring run is performed.
The OPTIMISATION "6" screen (Fig. 5-62) is displayed.