User Interface; Inputs And Outputs; Power Specifications (Absorption) - dBTechnologies VIO S318 Manual Del Usuario

USER INTERFACE

LED indicators:
Status LEDs (RDNet network):
Controls:

INPUTS AND OUTPUTS

Power supply inputs and re-launches:
Audio input:
Audio output:
RDNet inputs/outputs:
USB (firmware update):

POWER SPECIFICATIONS (ABSORPTION)

Absorption at 1/8 of the power in
average conditions of use (*):
Absorption at 1/3 of the power in
maximum conditions of use (**):
Absorption with the speaker turned
on with no signal (idle):
Inrush current:
Max number of modules in
a re-launched system (**)
[mains input + mains link]:
* NOTE FOR THE INSTALLER: Values refer to 1/8 of the power, in average operating conditions (music program with rare or no clipping).
It is recommended for any type of configuration to consider these as the minimum size values.
** NOTE FOR THE INSTALLER: Values refer to 1/3 of the power, in heavy operating conditions (music program with frequent clipping and
intervention by the limiter). It is recommended to size according to these values in case of professional installations and tours.
VIO-S318
52
Limiter, Signal, Mute/prot, Ready
Link, Active, Remote Preset Active
Polarity (0°/180°), Delay (0-9,9 ms), Funzione cardioide, Frequenza di
Xover (
70-75-80-85-90-95-95-100-105-Fullrange
1x XLR IN balanced (insulation: Floating ADC)
1x XLR link OUT balanced
Data In / Data Out (connettori etherCON®)
3.44 A (220-240V~) - 5.84 A (100-120V~)
7.8 A (220-240V~) - 13.6 A (100-120V~)
1 + 1 (220-240V~) / 1 + 0 (100-120V~)
), Sub Attenuation
PowerCON® In/Link
1x MINI USB type B
61 W
125.3 A
Cod. 420120244 REV. 1.1
English