Endfire Configuration - dBTechnologies VIO S318 Manual Del Usuario

ENDFIRE CONFIGURATION

• Use DBTECHNOLOGIES COMPOSER to set project parameters.
• Make sure that the local parameter of the different modules are correctly set
on the single amplifier panels. Make the audio daisy-chain, RDNet and power
connections as described in previous paragraphs. In turn-on phase, pay attention to
inrush current, written in
installation, evaluating a delayed turn-on of each subwoofer).
• In case of remote control with RDNet and DBTECHNOLOGIES NETWORK, local
settings are by-passed and control is shifted to software.
VIO-S318
46
TECHNICAL SPECIFICATIONS chapter (e.g. sizing electrical
English
Cod. 420120244 REV. 1.1