dBTechnologies VIO S318 Manual Del Usuario página 36

LED TYPE TURNING THE
SPEAKER ON
LIMITER OFF
OFF
SIGNAL
MUTE/ TURNED ON FOR
PROT A FEW SECONDS
READY OFF
10. RDNet NETWORK CONNECTION INPUT ("Data In")
For network cables with etherCON/RJ45 connectors.
Connect it to devices like RDNet Control 2 or Control 8 to use the remote control.
11. RDNet NETWORK CONNECTION DAISY CHAIN ("Data Out")
Compatible with network cables with etherCON/RJ45 connectors.
It is used for the remote control network daisy chain to further system modules in daisy-chain configuration.
12. CONTROL LEDs
LEDs relating to module network operation (RDNet).
In particular, if "Link" is on the RDNet network is active and has acknowledged the device, if "Active" is flashing
there is data traffic, if "Remote Preset Active" is on all local control on the amplifier panel are by-passed by the
RDNet remote control.
13. SERVICE DATA USB PORT
It is a mini-USB B port to be used only for product firmware update. For further information refer to
UPDATE".
VIO-S318
36
NORMAL GENERIC
OPERATION WARNING
TURNED OFF, TEMPORARY
TURNS ON ONLY FLASHING
IN THE EVENT OF
INTERVENTION
FLASHING IN THE NORMAL SIGNAL
PRESENCE OF A OF INPUT AUDIO
SIGNAL
OFF TEMPORARY
FLASHING
PERMANENTLY ON PERMANENTLY ON
Table of the status LED signals
English
SPEAKER SHUTS
DOWN DUE TO
MALFUNCTION
CONTINUOUS CYCLIC
FLASHING
OFF
PERMANENTLY ON
OFF
"FIRMWARE
Cod. 420120244 REV. 1.1