Makita XBU02 Manual De Instrucciones página 3

4. Never point the nozzle at anyone in
the vicinity when using the blower.
5. Never block
blower outlet.
Do not block suction inlet or blower
•
outlet to clean up in dusty areas.
Do not use the blower with a
•
tapered nozzle smaller than the
original one, such as a new nozzle
obtained by attaching an extra
diameter-reduced hose or smaller
hose to the nozzle top end.
Do not Use the blower to inflate
•
balls, rubber boat or the similar.
Increased motor revolution may cause
dangerous fan breakage and result in
serious personal injury. Heated motor
and control circuit may cause a fire.
6. AVOID UNINTENTIONAL STARTING.
Do not carry battery fitted tool with
finger on switch.
7. Some material contains chemicals which
may be toxic. Take caution to prevent
dust inhalation and skin contact. Follow
material supplier safety data.
8. Make sure that there are nobody around
you when you work at high places.
9. Recharge only
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
10. Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk
of injury and fire.
11. When battery pack is not in use, keep it
away from other metal objects, like
paper clips, coins, keys, nails, screws or
other small metal objects, that can make
a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
12. Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery may cause
irritation or burns.
suction inlet and/or
with the charger
13. Do not handle charger, including
charger plug, and charger terminals
with wet hands.
14. Do not charge the battery outdoors.
SAVE THESE
INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with
product (gained from repeated use)
replace strict adherence to safety rules
for the subject product. MISUSE or
failure to follow the safety rules stated in
this instruction manual may cause
serious personal injury.
Symbols
The followings show the symbols used for
tool.
･ volts
･ direct current
IMPORTANT
SAFETY
INSTRUCTIONS
FOR BATTERY
CARTRIDGE
1. Before using battery cartridge, read all
instructions and cautionary markings
on (1) battery charger, (2) battery, and
(3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating
excessively shorter, stop operating
immediately. It may result in a risk
of overheating, possible burns and
even an explosion.
4. If electrolyte gets into your eyes,
rinse them out with clear water and
seek medical attention right away. It
3
USD305-1
ENC007-8
time has become