Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Usually, hedges should be cut in the shape of
a trapezium (as in the figure), that is, both sides
are gradually larger in the bottom. This shape
will expose the surface of the hedge to sun light,
which will provide a more even growth. For
reference, apply an inclination of approximately
10 cm to a one-meter hedge (as in the picture).
Cutting sequence
First cut both sides, bottom up, so that small
pieces do not fall in the cutting area. After that,
cut the upper part (picture opposite).
In case of long branches, cut the hedge several
times to have better control of the equipment and
to demand less effort from the motor - branches
that are cut shorter, decompose easier.
Table for the Correct Use of the Extension Cord
Length in meters
Voltage
Gauge (Ø) in A.W.G.
Gauge (Ø) in mm
Voltage
Gauge (Ø) in A.W.G.
Gauge (Ø) in mm
Motor
Type
Single
Universal
phase
26
Indications
10
20
18
16
0.75
1.0
18
18
0.75
0.75
Technical Specifications
Voltage
Power
110/127 V
500 W
220/230 V
30
40
50
110 / 127 Volts
14
14
14
1.5
1.5
1.5
220 / 230 Volts
16
16
16
1.0
1.0
1.0
Blade length
51 cm
www.trapp.com.br
10 cm
60
70
80
12
12
12
2.5
2.5
2.5
14
14
14
1.5
1.5
1.5
Maximum cutting width
1.6 cm
90
12
2.5
14
1.5
Tabla de contenido
