Phasak PH 9273 Manual De Uso página 87

3. Operations
EN
Operating mode
Battery test
Warning status
Fault status
86
PH 9273 | PH 9293
Uninterruptable Power Supply
Description
When UPS is in AC mode or
CVCF mode, press "Test" key
for more than 0.5s. Then, the
UPS will beep once and
start"Battery Test". The line
between I/P and inverter icons
will blink to remind users. This
operationis used to check the
battery status.
If some errors occur in the UPS
(but it is still running normally),
it will show one more screen to
represent the warning situation.
In the warning screen,
the icon will be flashing, and
it can show up to 3 error codes
and each code indicates one
error. You can find the code
meaning in the warning code
table.
When UPS has fault
happened, the inverter will be
blocked. It will display fault
code in screen, and the
icon will light up. You can
find the code meaning in the
fault code table.
LCD display
Segurança e harmonia
ININTERRUPTA