Black+Decker BEMW472BH Manual De Instrucciones página 8

English
Fig. B3
Fitting the lower handle (Fig. C)
1. Insert the ends of the lower handle into the
corresponding holes in the mower.
2. Press the handle down as far as it will go.
3. Secure the handle using the screws.
Fig. C
Assembling the upper handle (Fig. D)
Fit the upper handle part to the lower handle using the
handle knobs 4 , washers and screws as shown.
Fig. D
4
Securing the motor cable (Fig. E)
1. The motor cable has to be fixed using the
cable restraints.
2. To clip the cable to the handle, snap a restraint
clip 14 around the cable and upper handle about 6
inches (152.4mm) below the comfort grip handles
3. Snap the second restraint clip around the cable and
lower handle about 6 inches (152.4mm) below the
handle knobs 4 .
6
Fig. E
4
Fitting the grass catcher (Fig. F)
1. Lift the grass catcher handle
catcher 8 over the lugs.
Fig. F
9
OPERATION

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
Proper Hand Position (Fig. G)

WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal injury,
ALWAYS hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on each of the
comfort grip handles
Fig. G
2
2 .
2
14
14
9 and place the grass
2 .
8