Tabla de contenido
Idiomas disponibles
Idiomas disponibles
P.52
-
P.53
-
P.54
-
P.55
-
P.56
-
P.57
-
P.58
-
P.59
5
MAINTENANCE INSTRUCTIONS
Regular monitoring of the machine is recommended. Before performing any maintenance, disconnect the machine
from the mains and keep it disconnected during the maintenance operations. Reduce the recommended mainte-
nance intervals in situations of intensive use.
Interval
Weekly
Quarterly
Annual
The handling of internal parts of the machine should be performed only by qualified personnel.
There is a risk of electric shock on contact with live parts. You should NOT operate without the covers pro-
perly placed. Before accessing the interior of the machine, unplug it from the mains and wait at least 5 mi-
SOLTER
SOLDADURA S.L.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Not available in this model.
Setting of assistance supervision for MIG Arc-force in the event of disturbances.
Check the condition of wiring and external accessories.
Replace worn components in torch.
Clean and tighten electrical connections of the welding circuit.
Blow the ventilation shaft with dry pressurized air from the outlet side ventilation (do not
remove the lateral covers during blowing).
Check the fastening between the transport unit and the power unit
Carry out a comprehensive inspection as specified by standard EN-60974. Contact your
dealer.
nutes before carrying out any maintenance.
Action
ATTENTION
AEROPROCESS
14
Tabla de contenido
