EN
EN
FR
ES
INSTRUCTIONS / INSTRUCTIONS / INSTRUCCIONES
DECORATING, ADDING WATER AND INHABITANTS TO YOUR AQUARIUM
DO NOT place hands, décor or introduce any inhabitants into the aquarium without removing at least 25% of the water volume as the displacement will over flow the aquarium water, and
may cause damage to the unit or the support surface.
Warning: Since water is employed with the use of an aquarium, do not place aquarium on surfaces that can be damaged by water.
1. Rinse ornaments and gravel (sold separately) to remove any debris before adding to your aquarium.
2. Add gravel to the aquarium.
3. Fill the aquarium up to half its height with room temperature water and decorate with plants, rocks etc. Ensure that the vents on the front of the filter module are not blocked by any type of décor.
4. Add the entire bottle contents of the Fluval Biological Enhancer and Fluval Water Conditioner (included) to the aquarium water. Fluval Biological Enhancer a densely
concentrated solution of good bacteria which helps the aquarium to mature more quickly. Fluval Water Conditioner eliminates traces of chlorine and other harmful metals contained in
your tap water.
5. Add more water, leaving enough room to float the inhabitants in their plastic bag until they acclimatise to the temperature of the aquarium water.
6. Introducing fish:
DO NOT ADD FISH IMMEDIATELY. Wait 3-4 days before introducing fish so that the water temperature has a chance to stabilize
your fish. It is not recommended to pour the water from the bag
7. Feeding fish:
them only as much as they can completely consume in two minutes, once a day.
DÉCORATION DE L'AQUARIUM ET INTRODUCTION D'ESPÈCES AQUATIQUES ANIMALES ET VÉGÉTALES
NE PAS se mettre les mains dans un aquarium ni y mettre des ornements ou des organismes aquatiques avant d'avoir enlevé au moins 25 % du volume d'eau, car l'eau, en se déplaçant,
déborderait de l'aquarium, ce qui pourrait causer du dommage à l'aquarium ou à son support.
Mise en garde : Étant donné que de l'eau est utilisée avec un aquarium, ne pas placer celui-ci sur des surfaces susceptibles d'être endommagées par l'eau.
1. Rincer les ornements et le gravier pour enlever les débris, avant de les mettre dans l'aquarium.
2. Mettre du gravier dans l'aquarium.
3.
grillage sur le devant du système de filtration.
4. Verser tout le contenu de la bouteille du traitement de l'eau Fluval (compris) et du renforçateur biologique Fluval (également compris) dans l'eau de l'aquarium. Le
renforçateur biologique Fluval
besoins des organismes vivants. Quant au traitement de l'eau Fluval
5.
l'eau de l'aquarium.
6. Introduction des poissons
17
DO NOT OVERFEED YOUR FISH