Operating The Machine - EMAK Oleo-Mac OM 92 Manual De Uso

4. OPERATING THE MACHINE

4.1 LOCATION OF THE CONTROL ELEMENTS
(1) Throttle lever
(2) Motor hours counter
(3) The mowing function activation switch when the grass catcher is full
(4) Deactivation of the mowing deck disengagement for reversing
(5) Mowing deck engagement switch
(6) Indicator light showing that the brake pedal is stepped on and the parking brake is
engaged
(7) Main power switch
4.1
(8) Forward drive pedal
(9) Reverse drive pedal
(10) Parking brake controller
(11) Brake pedal
(12) Mowing deck elevation adjustment lever
(13) By-pass lever
4.2 DESCRIPTION AND FUNCTIONS OF THE CONTROL ELEMENTS
4.2.1 STANDARD CONTROL ELEMENTS
(1) THROTTLE LEVER
Serves to regulate the engine speed. It has the following three positions:
* Only on machines with a BS15, BS17 and K 1600 engines
(2) MOTOR HOURS COUNTER
The motor hours counter implicitly displays the total number of
motor hours. By pressing the Mode button you gradually switch
between the following maintenance functions:
TMR 1 - individual trip counter. The value is reset by
OIL CHG - oil change. The function has two oil change
AIRFILTER SVC - cleaning or changing the oil filter. The interval is set to 50 hours.
Two hours before the set interval has elapsed the display will show a message lasting 10 seconds.
After the interval has elapsed the display will show a message NOW.
Any of the above mentioned alarms can be reset by holding down the Mode button for 6 seconds.
CHOKE*
MAX
MIN
holding down the Mode button for 6 seconds.
intervals. The first is after 5 hours (oil change after the engine has run itself in) and
is shown only once. The second is after 25 hours (standard oil change).
Starting a cold engine
Maximum engine speed
Minimum engine speed (idle)
36