Using The Drying Rack - Whirlpool Vantage WED7990XG Manual De Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Using the EcoMonitor
Your dryer features an EcoMonitor, which allows you to
keep track of energy savings over time. Using cycles with the
Eco option and drying on low heat will raise your Eco rating.
LED drum light
The dryer light automatically turns on inside the dryer drum
when you open the door.
An LED drum light is used. The LED lights should not require
changing; however, if replacement is needed, please contact
a qualified service technician.

USING THE DRYING RACK

To obtain a drying rack for your dryer, follow the instructions
included in your dryer drum. Remove and discard any packing
material before use.
Use the Drying Rack for items that you do not want to tumble
dry, such as sweaters and tennis shoes. When you use the
drying rack, the drum continues to turn, but the rack remains
stationary.
The drying rack is intended for use with the Timed Dry cycles
only. The drying rack cannot be used with Automatic cycles.
To use the drying rack:
IMPORTANT: Do not remove the lint screen.
1. Open the dryer door.
2. Align the two hooks on the front of the drying rack with the
holes in the dryer door opening and press down fully into
holes. Rest the rear support on the dryer back ledge.
3. Place wet items on top of the drying rack. Allow space
around items for air to circulate. The drying rack does not
move, but the drum will rotate. Make sure items do not
hang over the edges or between drying rack grille.
4. Close the door.
5. Select a Timed Dry/Air Only, or Low Temperature cycle.
Items containing foam, rubber, or plastic must be dried on
a clothesline or by using the Air Only setting.
6. When the cycle is selected, the Estimated Time Remaining
display shows the default time. You can change the actual
time in the cycle by increasing or decreasing the cycle
time.
7. Start the dryer.
NOTE: Check the lint screen and remove any lint accumulated
from items dried on the drying rack after the cycle is finished.
13
Tabla de contenido

Solución de problemas

loading

Tabla de contenido