How To Sew On A Button - ELNA eXplore 220 Manual De Instrucciones

5
4
3
2
1
0
1
2
3
4

How To Sew On a Button

(Model 220– optional foot)
Hand sewing buttons to a garment is very time-con-
suming.
Sew them on in one quick, easy step.
1. Drop the feed dog. See page 6.
2. Place the button on the fabric and turn the fly-
wheel to lower the needle into a hole of the but-
ton. Lower the presser foot to hold the button in
place.
3. Turn the flywheel to have the needle enter the
opposite hole of the button. Readjust the stitch
width if necessary. To form a thread shank, place
a pin on top of the foot.
Stitch several times.
After you finish sewing, cut the thread but leave
10-15 cm (4-6") of thread at the button.
4. Pull the thread to the reverse side of the fabric
and tie the threads.
Raise the feed dog after sewing on buttons.
64