Care & Cleaning; Troubleshooting - Glacier bay F8FA0041CP Guía De Instalación Y Cuidado

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Operation(continued)
Removing the quick connector
CAUTION: Be careful in removal of the quick connector
end of spray hose (G) to not cut hands.
Push the quick connector housing on the hose (G)
upward. Hold the clip and housing together and pull
downward.
Care and Cleaning
This faucet is designed for years of trouble-free performance. Keep it looking new by doing the following:
Clean periodically with a soft cloth.
Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty.

Troubleshooting

NOTE: Refer to the service parts section in this manual for
a detailed drawing showing the location of the parts listed
below.
Problem
There are leaks underneath the
handle.
The aerator leaks or has an
inconsistent water flow pattern.
The spout leaks.
Possible Cause
The retainer nut has come loose
and the O-ring on the cartridge
is dirty or damaged.
The aerator is dirty or mis-fitted.
The retainer nut is loose.
6
1
G
Solution
Tighten the retainer nut.
Clear or replace the O-ring.
Remove the aerator and check for
debris in the aerator screens.
Confirm that the rubber washer is
properly installed.
Tighten the retainer nut.

Capítulos

Tabla de contenido
loading

Tabla de contenido