Adding And Subtracting Distances - Velleman DEM700 Manual Del Usuario

Medidor de distancia laser
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
3.
Press the MEAS button a second time and measure the length of the
bottom line [2].

7.7 Adding and Subtracting Distances

1.
Measure your first distance.
2.
Press the + or – button to enter the adding or subtracting mode.
3.
Measure your second distance.
4.
The meter automatically calculates the length. The value appears on
the LCD display.
7.8 Storing and Browsing Measurements
Storing
Measured values will automatically be stored in the meter's memory. The
memory can store up to 10 measurement values.
Browsing
1.
Press the storage button to enter the meter's memory.
2.
Browse through the stored values with the + or – button.
3.
Hold the storage button pressed to delete all previously stored values.
7.9 Time Delay Measurement
After switching on the meter, press the TIMER button to delay the
measurement for about 5 seconds.
V. 03 – 29/03/2019
DEM700
8
©Velleman nv
Tabla de contenido
loading

Tabla de contenido