Velleman VLEVP1N Manual Del Usuario página 4

3. Insert the battery into the charging slot. Mind the polarity.
Charging starts automatically.
4. The LED indicates the charging capacity:
1 LED: battery 25 % charged
2 LEDs: battery 50 % charged
3 LEDs: battery 75 % charged
4 LEDs: battery fully charged
5. The VLEVP1N will stop charging when the battery is fully
charged. Remove the battery from the charger and disconnect
the charger from the power source.
Remarks
 The device is only for use with 10440 - 14500 - 14650 - 16340 -
17335 - 17500 - 17670 - 18350 - 18490 - 18500 - 18650 - 18700
- 22650 - 25500 - 26650 3.6 V and 3.7 V Li-ion batteries.
Charging other battery types may be hazardous, and can damage
the batteries and charger.
 Keep the device away from water and excessive dust.
 Do not disassemble the device as damage may result.
 Do not use a damaged device.
Tips
 Because of different battery types, capacities and over-charge
depths, the battery revive time may vary. Heavily over-discharged
batteries may not be able to be revived.
 To top up a battery with a voltage of 4.0 V or higher, insert the
battery first before plugging in an AC adapter (not incl.). If you do
the opposite, the charger may not charge the battery.
 It is recommended to remove the battery from the charger once
charging has completed. If the battery is left in the charger, the
charger will automatically restart the charging cycle when the
battery voltage drops below 4.1 V.
 The device has an integrated short-circuit protection. Note that
this protection only protects the charger but does not prevent the
battery from short-circuiting internally.
 Specifications and features are subject to change. Please find the
most recent description and specifications of the device on the
Velleman website.
V. 01 – 11/07/2016
VLEVP1N
4 ©Velleman nv