Conceptronic C54APM Manual De Inicio Rápido página 52

ENGLISH
IP Address
Subnetmask
Gateway Address
DHCP Server
Default Gateway Address
Domain Name Server IP
Start IP/End IP
Domain Name
Lease Time
Click the Apply button at the bottom of the screen to save the above configurations.
Enter here the Access Point's IP Address. This IP Address
should be unique in your network. The default IP Address is
10.0.0.1.
Specify a Subnet Mask for your LAN segment. The Subnet
Mask of the Access Point is fixed and the value is 255.0.0.0.
Enter here the IP address of the default gateway of the subnet
that this Access Point resides in. It allows this Access Point to
be accessible PC from different subnets.
Enable or disable the DHCP Server.
Specify the gateway IP in your network. This IP address should
be different from the Management IP.
This is the ISP's DNS server IP address that they gave you; or
you can specify your own preferred DNS server IP address.
You can designate a particular IP address range for your
DHCP server to issue IP addresses to your LAN Clients. By
default the IP range is from: Start IP 10.0.0.100 to End IP
10.0.0.200.
You can specify the Domain Name for your Access Point.
When the DHCP Server is enabled, it will temporarily give your
LAN client an IP address. In the Lease Time setting you can
specify the time period that the DHCP Server gives an IP
address to your LAN clients. The DHCP Server will change
your LAN client's IP address when this time threshold period is
reached.
52