Conceptronic C54APM Manual De Inicio Rápido página 45

ENGLISH
Parameter
Authentication Type
Fragment Treshold
RTS Treshold
Beacon Interval
Data Rate
Preamble Type
Broadcast ESSID
IAPP
Description
Ther e are tw o authentication types: "Open System" and "Shared
Ke y" . W hen you select "Open System", wireless stations can
a sso ciate with this access point without WEP encryption. When you
selec t "Shared Key", you should also setup WEP key in the
"Encr yption" page and wireless stations
in th e authentication phase to associate
selec t "Auto", the wireless client can asso
by using an y one of these two authentication types.
"Frag ment Threshold" specifies the maximum size of packet during
the f ragmentation of data to be transmitted. If you set this value t
low, it will result in bad performance.
When the packet size is smaller the RTS threshold, the acce
will not use the RTS/CTS mechanism to send this packet.
This is the period of time that this Access Point broadcasts
beacon. Beacon is used to synchronize the wireless network.
The "Data Rate" is the rate this Access Point uses to transmit data
packets. The Access Point will use the highest possible selected
transmission rate to transmit the data packets.
The Preamble type defines the length of preamble block in the
frames during the wireless communication.
Auto select : It will auto switch to the more suitable method.
Short: It is suitable for high traffic wireless network
Long: It can provide more reliable communication
If you enable "Broadcast ESSID", every wireless station located
within the coverage of this access point can discover this access
point easily. If you are building a public wireless network, enabling
this feature is recommended. Disabling "Broadcast ESSID" can
provide better security.
If you enable "IAPP", the access point will automatically broadcast
information of associated wireless stations to its neighbours. This
will help wireless station roaming smoothly between access points. If
you have more than one access points in your wireless LAN and
wireless stations have roaming requirements, enabling this feature is
recommended. Disabling "IAPP" can provide better security.
45
should use WEP encryption
with this access point. If you
ciate with this access point
a
oo
ss point