Selecting The Days To Water - Toro Custom Command 36 Station Manual Del Usaurio

Note: The Custom Command will operate one watering cycle in a
program at a time. If a start time occurs while a watering cycle is in
progress, the start time will be delayed until the previous cycle is
finished (this is called "start time stacking"). If the watering cycle
extends past midnight into the next day, the cycle will continue
operating until finished. However, if a watering cycle has been delayed
until after midnight into a non-watering day, the watering cycle will
not occur.

SELECTING THE DAYS TO WATER

Several watering day scheduling options are available. Each watering
program can utilize any ONE of the following schedules:
• Days of the week
Use this type of schedule to water on specific days of the week. The
days are displayed as three-letter abbreviations. For example, Sunday is
, Monday is , etc. Only the days you select to water will
SUN MON
remain on the display.
• Odd Days or Even Days
To select every odd or even number calendar day, use this option.
Because the 31st and the 1st are both odd number days, the 31st is
automatically removed from the schedule. This watering day option
also enables selected days of the week to be removed from the
schedule.
• Day Interval
Selecting watering days by Day Interval enables a specific number of
days between watering to be selected. For example, selecting a 1-day
Interval schedules watering for every day. A 2-day interval schedules
watering for every other day. A 30-day interval is the maximum
interval frequency, which provides watering once every 30 days.
Another setting within the Day Interval is the current day of the
schedule. The current day (displayed as ) can be set for any day
TODAY
within the interval. This number automatically increases by one every
day. When the number equals the Day Interval number, a
TODAY
watering day will occur. For example, to water every third day starting
today, a 3-day interval would be set with as day 3. Or, to water
TODAY
every 5 days starting tomorrow, a 5-day interval would be selected with
as day 4.
TODAY
Programming the Controller
13