Pressure Washer Location - Craftsman 580.752870 Instrucciones De Uso

HOWTO USEYOURPRESSURE WASHER
if you have any problems operating your pressure washer,
please carlthe pressure washer helpline at 1-800-222-3136.
Pressure Washer Location
Oarbon Monoxide Poisoning
A WARNING POISONOUS GAS HAZARD. Engine
exhaust contains carbon monoxide, a poisonous
gas that could kill you in minutes. You CANNOT
smell it, see it, or taste it. Even if you do not
smell exhaust fumes, you could still be exposed to carbon
monoxide gas.
, Operatethis product ONLY outside far away from windows,
doors and vents to reducethe risk of carbon monoxide gas
from accumulating and potentially being drawn towards
occupied spaces.
* Install battery-operated carbon monoxide alarms or pBg@
carbon monoxide alarms with battery back-up according to
the manufacturer's instructions. Smoke alarms cannot detect
carbon monoxide gas.
* DO NOTrun this product inside homes, garages, basements,
crawBpaces, sheds, or other partially-enclosed spaceseven
if using fans or opening doors and windows for ventilation.
Carbon monoxide can quickly build up in these spacesand can
linger for hours, even after this product has shut off.
* ALWAYS placethis product downwind and point the engine
exhaust away from occupied spaces.
If you start to feel sick, dizzy, or weak while using this product,
shut it off (0) and get to fresh air RIGHTAWAY. Seea doctor. You
may havecarbon monoxide poisoning.
To Start Your Pressure Washer
To start your engine-powered pressure washer for the first
time, follow these instructions step-by-step. This information
also @pries whenever you start the engine after you have let
the pressure washer sit idle for at bast a day.
1. Place pressure washer outside near an water source
capableof supplying water at a flow rate greater than
3.3 gallons per minute and no less than 20 PSi at
pressure washer end of garden hose.
2. Checkthat high pressure hose is tightly connected to
spray gun and pump. See Assemblyfor illustrations.
3. Make sure unit is in a level position.
4. Connectgarden hose to water inlet on pressure washer
pump.
NOTICE DO NOT run the pump without the water supply
connected and turned on.
° Damage to equipment r esulting from failureto followthis
instruction will voidwarranty.
.
5. Turn on the water, press red button on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
6. Attach nozzleextension to spray gun. Tighten by hand.
%
Choose spray tip you want to use, pull back on collar
of nozzle extension, insert spray tip and releasecollar.
Tug on spray tip to make sure it is securely in place. See
How to Use Spray Tips.
8. Push engine rocker switch (B) to ON (I) position.
Risk of Fire Ciearanees
A WARNING Exhaust heat/gases could ignite
combustibles, structures or damagefuel tank
causing a fire, resulting in death or serious injury.
, Keepat bast 5 ft. (1.5 m) clearanceon all sides of pressure
washer including overhead.
12