Sears Kenmore 1101 Guía De Uso Y Cuidado página 17

4. 3-Wire Power Cord Installation
WARNING:
The neutral or ground wire of the
power cord must be connected to the neutral terminal
located in the center of the connector block° The
power leads must be connected to the outside (brass
colored) terminals.
Remove the 3 wire terminal screws from the connector
bfock, Insert screws through each power cord terminal
ring and into the connector block until the screws
engage the nuts. Be certain that the center wire is
connected to the center screw of the connector block.
Tighten screws securely
Do NOT remove ground strap connection.
Neutral terminal
)
Power cord
Connector block
Ground strap
5. 4-Wire Power Cord Installation
WARNING:
The neutral wire of the supply
circuit is connected to the neutral terminal located in
the center of the connector block. The power leads
must be connected to the outside (brass colored)
terminals. The 4th grounding lead must be connected
to the frame of the range with the grounding plate
and grounding screw.
a. Remove the 3 screws from the connector b_ock.
b.
C.
Remove the grounding screw and strap from the
connector block middle location and the screw
connection to the frame of the range.
Insert screws through each power cord terminal ring
and into connector block until screw engages nut.
Be certain that the center wire is connected
to the center screw of the connector block,
Tighten screws securely,
d. Attach ground wire to the frame of the range,
Before
Neutral terminal
Ground Strap
(grounding to range)
After
Neutral terminal
- plate
Grounding to range
"17