Network Connection - Akasa integral Manual De Usuario

for Mac
Network Connection Mode
Hardware installation
Connect INTEGRAL LAN to Network:
1. Connect one end of the included Ethernet cable to the Ethernet port on the INTEGRAL LAN
and the other to a switch or router. (100 Base-T).
2. Make sure the power adaptor connector is firmly attached to the INTEGRAL LAN and to a power
source.
. Switch ON the INTEGRAL LAN.
CAUTION! Do not connect
USB cable and Ethernet
cable at the same time.
INTEGRAL LAN
Ethernet Cable
Wired/Wireless
Ethernet Router
Computer 1 Laptop 1
Ethernet Router Setup Example
18

Network Connection

INTEGRAL LAN
Ethernet Cable
AC Power
Ethernet Switch
Computer 1 Laptop 1 Computer 2
Ethernet Switch Example
AC Power
Wireless
Laptop 2
for Mac
Software installation
Installation of NDAS software is necessary to use the INTEGRAL LAN as a network drive. Installation
ofthe software is simple and easy. Please insert the Installation CD into your CD-ROM drive and select
the Drivers folder.
STEP 2
Click on the INTEGRAL DRIVER icon on the
desktop and navigate to the the folder [p2l] and
then the folder [mac].
STEP 3
Select and click on the folder for your Mac OSX,
select the Tiger driver for Mac OSX version 10.4
or the Panther driver for Mac OSX version 10..
STEP 4
Double click on [NDAS Install package] to
launch the installation.
19
Network Connection
STEP 1
Insert the INTEGRAL driver CD to your Mac.
STEP 5
Welcome to the Akasa INTEGRAL LAN installer
Click Continue to start the installation.