Network Connection; Hardware Installation - Akasa integral Manual De Usuario

for Windows
5.
Gently insert the tray into the enclosure
aligning the guide rail with the grooves of the
enclosure housing.
7.
Insert the tray completely into the housing
and secure the enclosure face plate to the
enclosure using the screws provided.
6
Harddisk Installation
6.
Before fully inserting the tray, connect the
HDD activity LED to the -pin connector.
Make sure the blue wire is to the outside and
the red wire is to the inside.
NOTE: The integral logo on the front bezel
serves two operational purposes: indicates
power and hard drive activity.
-pin HDD activity
LED connector
8.
Connect the round end of the DC power cord
to the back of the enclosure, making sure it is
correctly aligned. Plug the AC cable into the
power pack, and then connect the supplied
adapter into an available AC socket.
NOTE: Please ensure that you are using the
supplied power pack only.
for Windows

Network Connection

Hardware installation

Connect INTEGRAL LAN drive to Network:
1. Connect one end of the included Ethernet cable to the Ethernet port on the INTEGRAL LAN
enclosure and the other to a switch or router. (100 Base-T).
2. Make sure the power adaptor connector is firmly attached to the INTEGRAL LAN and to a power
source.
. Switch ON the INTEGRAL LAN.
CAUTION! Do not connect
USB cable and Ethernet
cable at the same time.
Wired/Wireless
Ethernet Router
Computer 1
Ethernet Router Setup Example
7
Network Connection
INTEGRAL LAN
Ethernet Cable
Ethernet Switch
Computer 1 Laptop 1
Ethermet Switch Example
INTEGRAL LAN
Ethernet Cable
AC Power
Laptop 1 Wireless
Laptop 2
AC Power
Computer 2