Akasa integral Manual De Usuario página 7

for Windows
INTEGRAL LAN Registration and mounting
After installing the software you need to register your new INTEGRAL LAN if you are using your new
drive in Network Mode. The steps below will guide you through the Registration Wizard which will help
detect your new device.
2.
Select Next to continue. Enter a name for this
device and press Next to continue.
12
Network Connection
1.
Click on the NDAS Device Management Icon
located on the system tray, and select "Register
a New Device. The "NDAS" Registration
Wizard" will appear.
3.
Enter your INTEGRAL LAN ID and Key (see
step 2 of Harddisk installation). Click Next to
continue.
NOTE: A Key is needed to write to NDAS
device. If the Write key is not provided, users of
this system are restricted to Read Only from this
device.
for Windows
5.
After you have registered your INTEGRAL LAN
click Finish.
7.
Select "Install the software automatically", and
click Next to continue.
1
Network Connection
4.
The Registration Wizard will check your NDAS
device status, and detect your new INTEGRAL
LAN drive. Chose how you want to mount the
device and press Next.
• Read/Write mode mounts device to read
and write.
• Read Only mode mounts device to read
Only.
• Don't Mount: device is left not
connected.
NOTE: If you haven't entered the KEY the
Write/Read mode is disabled.
6.
After the registration, the Found New Hardware
Wizard may appear. Select "No, not this time"
and click Next to continue.