Husqvarna LB 146i Manual De Usuario página 9

Work safety
WARNING: Read the warning instructions
that follow before you use the product.
Use this product to cut grass
•
lawns only. It is not permitted
to use it for other tasks.
Use personal protective
•
equipment. See
protective equipment on page
10 .
Do not operate the product in
•
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
Do not operate the product
•
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
Make sure that the blade does
•
not hit objects such as stones
and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
causes heavy vibration and a
very high risk that the blade
becomes loose.
If the blade hits an object or if
•
vibrations occur, stop the
product immediately. Stop the
motor, turn the safety key to 0
and remove the battery.
Examine the product for
damages. Repair damages or
901 - 003 - 25.10.2018
Personal
let an authorised service agent
do the repair.
Never attach the motor brake
•
handle permanently to the
handle when the motor is
started.
Put the product on a stable,
•
flat surface and start it. Make
sure that the blade does not
hit the ground or other objects.
Always stay behind the
•
product when you operate it.
Let all the wheels stay on the
•
ground and keep 2 hands on
the handle when you operate
the product. Keep your hands
and feet away from the
rotating blades.
Do not tilt the product when
•
the motor is started.
Be careful when you pull the
•
product rearward.
Never lift up the product when •
the motor is started. If you
must lift the product, first stop
the motor, turn the safety key
to 0 and remove the battery.
Do not walk rearward when
•
you operate the product.
Stop the motor when you
•
move across areas without
grass, for example paths
made of gravel, stone and
asphalt.
Do not run with the product
•
when the motor is started.
9